In recent times, 1link has become increasingly relevant in various contexts. DIY Apex 1Link Cable | Reef2Reef. A 1Link port has 2 lines for power and 2 for data. That is the idea of 1link, 1 cable takes over for 2.
Apex also has 24V DC with no control. That is not 1link, it is just 24V DC. Furthermore, the cable in the link above has the connector for Apex 24V on one end and bare wires on the other.
In the related products there is a 10' 1link. The Neptune Systems Apex 1Link module - Possible accessory combos. The 1link still works if you need the extra 24V or 1link ports. It's important to note that, that module does require a power supply to be plugged in for the 1link module to supply the 24V.
Stay away from WAV, 1Link - pumps start to fail after 1 year.. Figured I let the community know - guys stay away from Neptune WAV pumps and the 1Link module. This perspective suggests that, someone started a very nice thread on Neptune Community Forums, asking members who ran WAVs for more then a year. Reports started coming in of the pumps starting to fail right between 1-2 years of use...
24V DC Accessories Port VS 1 Link Ports on EB832 | Reef2Reef. This perspective suggests that, the 1Link ports are not like a regular DC24 Accessory port. Similarly, the 1Link ports do not show up as a controllable output, so you cannot create any programming to turn them On or Off like the regular DC24 Accessory ports. The 1Link ports are essentially just another AquaBus port that happens to also carry 24v of power, but can only be used to connect approved 1Link devices which contain motors ...
Neptune Apex Base unit w/1link cable and aquabus. I am putting up for consideration my Apex A2 base unit w/4 probes, aquabus and 1link cable. I believe they called this the "Pro" kit when i purchased back in 2020. Neptune Apex 1Link Module internal jumper | Reef2Reef.
The 1LINK modules will be used only for non critical applications. For instance, I have a 24V LED for my chaeto that I could power thru the 1LINK 24DC port. Things that should not cause a catastrophe if happen once every 6 months. It's important to note that, still, I would love to learn what is the purpose of those jumper pins in side the 1LINK module. Apex Hardware Overview | Reef2Reef.
The 1Link module provides three 1Link ports to control 1Link devices, such as the WAV, DOS, COR-15, or Trident modules. In relation to this, the 4-pin Molex connector 1Link cables combine the communications of the AquaBus cable with 24v power to control motors, thereby eliminating extra cables and extra power adapters. It also includes two 24v Accessory ports using the 2-pin Molex connector to control a PMUP ...
📝 Summary
Through our discussion, we've examined the multiple aspects of 1link. These insights don't just enlighten, but also assist individuals to take informed action.
Whether you're exploring this topic, or an expert, you'll find something new to learn regarding 1link.