In recent times, cdi electronics troubleshooting guide has become increasingly relevant in various contexts. HOW TO CHECK IF CDI IS BAD??? The cdi's main function is to control the point at which the spark is delivered to your spark plug, the cdi basically took the place of the old points systems. If it runs at all the cdi and the stator are good, as well as the coil. 1987 Warrior No Spark - Blue Traxx Forum. got a 1987 warrior 350, getting no spark out of the ign coil, ive done all the test and everything comes back fine, ive tried different stators, cdi boxes, rectifiers.
new key switch, and kill switch.... but i noticed that i would get 35v AC out of the red and brown wire coming from the stator... 01 warrior 350 NO SPARK! I recently baught a warrior 350 and the owner told me he rode it then shut it off and went to ride again in the same day and no spark.
I put a New stator in it. He had put a brand New ignition coil and cdi in it as well. I tested the kill switch and I also tried bypassing the clutch safety... how do i test the orange wire???
The CDI box is sending its 12V pulse to the coil, as it should, but the coil is unable to properly transform it. Nothing, or an inconsistent blink of the test light, indicates that your ignition coil is not recieving its proper trigger pulse from the other components of the bike's ignition system. Cdi wiring help - Blue Traxx Forum. My CDI box has 12 wires and I believe it is a 90-95 also my stator has 7 wires please any help is much appreciated a CDI box wiring diagram with wire description particularly would be awesome.
'94 Warrior - stator wiring/CDI pinout? The orange wire out of CDI is still constant ground. I don't know if this is being caused by A) the CDI itself or B) one of the inputs (clutch switch, neutral or ignition cutout relays?) to the CDI. Equally important, is there a way to test the CDI itself?
Another key aspect involves, the pulse generator and pickup coil seemed to test within spec for Ohms. MOTO 4 no spark - Blue Traxx Forum. OK after racking my brains for the past few months I have tested everything and have new CDI, Coil+wire, plug and pick ups are ohming good. Key switch seems to test fine and start stop witch as well.
96 warrior need wiring schematic plz - Blue Traxx Forum. I'm pretty sure the problem lies after the cdi box near the solinoid. This perspective suggests that, specifically the red and white wire and the blue and white wires that come off of the small solinoid prongs. 87' 350 warrior wiring diagram? my cdi box is cut out of my warrior, does anybody know that wiring diagram to install the cdi box or maybe color codes to completely redo the cdi box on my 87 warrior?
📝 Summary
Knowing about cdi electronics troubleshooting guide is valuable for people seeking to this area. The insights shared throughout acts as a comprehensive guide for deeper understanding.