Length Mils

Understanding length mils requires examining multiple perspectives and considerations. Ruger American Rimfire | Gunner Forum. This is my new .22 rifle. The one I have is the compact model with an 18" barrel and the 12.5" length of pull. It came with both a low iron sight stock module and a scope sight module.

I ordered the full-length scope module to give it a try. Switching them is easy - just unscrew the rear sling... The Kiss Carbine - Gunner Forum. Light weight (pencil barrel) barrel with a mid-length gas system. Mid length is a personal preference, also it'll be either chrome lined or melonited, either or.

Jeff Quinn reviews the .480 Ruger Alaskan 5-shot revolver. After firing a trio of identical-length Super Redhawks with Hornady’s own 300-grain .44 Magnum, 325-grain .480 Ruger, and 300-grain .454 Casull loads, I’ll testify that the .480 feels much more like the .44 than the .454, and I can shoot the .480 for as long as I want without undue stress. Lyman Scopes - Gunner Forum. In relation to this, keeping the focal length long and lens or mirror curvature shallow is a classic way to minimize optical errors.

It's why those old spotting scopes you see pirates and pioneers using were extendable in several sections. Lever Action Rifles | Page 3 | Gunner Forum. Furthermore, lever Action Rifle Forum - Lever Action Rifle topics and discussion

W 296 in .38 Special +P? If you want a .357 Mag load, use .357 Mag! I just want to know if anybody here has ever used W 296 powder for a .38 Special +P load, specifically for a 125 grain JHP. I have used 2400, and was not overly impressed with the results.

These loads will be used only in .357 Mag guns, or my Service Six, which is a .38 Special, but should be able to take about any .38 load, as it is the same ... 30 30 for T/C | Gunner Forum. The brass is range brass, I normally full length size myself. I have never neck sized my self, full length works for me.

Another key aspect involves, beside around here I can get 30 30 brass pretty easy. Yea I am looking forward to testing out the lead bullet s in the T/C never have loaded lead bullets for the T/C before. Winchester model 55 30 WCF - Gunner Forum. There was a toggle like thing on the end of the half-length magazine tube.

You flipped it up and unscrewed it, and then the barrel, forearm mag tube could be twisted and removed. It was chambered for .30-30 Winchester and was quite accurate as I recall.